Peer Reviewed Publications : (* corresponding authors, # co-first authors)
2019

51. M. Y. Oh#,  J. H. Kim#, Y. W. Lee, K. J. Kim, H. R. Shin, H. Park, K. T. Lee*, K. Kang*, T. H. Shin*,

"Enhancing bi-functional catalytic activity via a nanostructured La(Sr)Fe(Co)O3-δ @Pd matrix as an efficient electrocatalyst for Li-O2 batteries"

ACS Applied Energy Materials, Accepted, (2019). (IF=TBA)

(https://doi.org/10.1021/acsaem.9b01540)

50. B. -H. Yun#, K. J. Kim#, D. W. Joh#, M. S. Chae, J. J. Lee, D. -W. Kim, S. Kang, D. Choi, S. -T. Hong, and K. T. Lee*,

"Highly active and durable double-doped bismuth oxide-based oxygen electrodes for reversible solid oxide cells at reduced temperatures ",

Journal of Materials Chemistry A, 7, 20558, (2019). (IF= 10.733)

49. D. Kim#, J. W. Park#, B. -H. Yun, J. H. Park, and K. T. Lee*,

"Correlation of Time-Dependent Oxygen Surface Exchange Kinetics with Surface Chemistry of La0.6Sr0.4Co0.2Fe0.8O3-𝛿 Catalysts", 

ACS Applied Materials & Interfaces, 11, 31786 (2019). (IF=8.456)

48. I. Thaheem#, K. J. Kim#, J. J. Lee, D. W. Joh, I. Jeong, and K. T. Lee*,

"High performing Mn1.3Co1.3Cu0.4O4 spinel based composite cathodes for intermediate temperature solid oxide fuel cell",

Journal of Materials Chemistry A, 7, 19696 (2019). (IF= 10.733)

47. J. Park, D. Kim, W. A. Appiah, J. Song, K. T. Bae, K. T. Lee, J. Oh, J. Y. Kim, Y. Lee, M. Ryou*, and Y. M. Lee*,

"Electrode Design Methodology for All-solid-state Batteries: 3D Structural Analysis and Performance Prediction",

Energy Storage Materials, 19, 124 (2019). (IF=TBA)

46. J. H. Park#, K. T. Bae#, K. J. Kim, D. W. Joh, D. Kim, J. Myung*, and K. T. Lee*,

"Ultra-Fast Fabrication of Tape-Cast Anode Supports for Solid Oxide Fuel Cells via Resonant Acoustic Mixing Technology", 

Ceramics International, 45, 12154 (2019). (IF=3.450)

45. K. J. Kim, T. H. Shin*, and K. T. Lee*,

"A-site deficient La0.4Sr0.4TiO3-Ce0.9Gd0.1O1.95 composites as efficient and redox stable anodes for solid oxide fuel cells", 

Journal of Alloys and Compounds, 787, 1143 (2019). (IF=4.175)

44.  K. Samdani, S. H. Kim, J. H. Park, S. H. Hong*, and K. T. Lee*,

"Morphology-controlled synthesis of Co3O4 composites with bio-inspired carbons as high-performance supercapacitor electrode materials", 

Journal of Industrial and Engineering Chemistry, 74, 96 (2019). (IF=4.978) 

43. K. J. Kim#, M. Rath#, H. Kwak, H. J. Kim, J. W. Han, S. T. Hong, and K. T. Lee*,

"A Highly Active and Redox Stable SrGdNi0.2Mn0.8O4±δ Anode with In-situ Exsolution of Nanocatalysts",

ACS Catalysis, 9, 1172 (2019). (IF=12.221)

           *News report in 매일신문, 중앙일보, 전자신문(etnews),  아시아뉴스통신, etc. 

42.  I. Thaheem, D. W. Joh, T. Noh, and K. T. Lee*,

"Highly conductive and stable Mn1.35Co1.35Cu0.2Y0.1O4 spinel protective coating on commercial ferritic stainless steels for intermediate-temperature solid oxide fuel cell interconnect applications", 

International Journal of Hydrogen Energy, 44, 4293 (2019). (IF=4.084)

41. D. W. Joh, H. R. Shin, J. Kim, and K. T. Lee*,

"Temperature-dependent long-term stability of Sr0.6Na0.4SiO2.8 fast ion conductors",

Journal of Industrial and Engineering Chemistry, 71, 387 (2019). (IF=4.978)

IF published in Jun. 2019
 
2018

 

40. K. Samdani, J. H. Park, D. W. Joh, and K. T. Lee*,

"Self-assembled Bi2MoO6 nano-petal array on carbon spheres towards enhanced supercapacitor performance", 

ACS Sustainable Chemistry & Engineering, 6, 16702 (2018). (IF=6.140)

39. C. -M. Hyun, J. -H. Choi, S. W. Lee, J. H. Park, K. T. Lee, and J. -H. Ahn*,

"Synthesis mechanism of MoS2 layered crystals by chemical vapor deposition using MoO3 and sulfur powders,

Journal of Alloys and Compounds, 765, 380 (2018). (IF=3.779)

 

38. D. W. Joh, A. Cha, J. H. Park, K. J. Kim, K. T. Bae, D. Kim, Y. K. Choi, H. An, J. S. Shin, K. J. Yoon* and K. T. Lee*,

“In-situ synthesized La0.6Sr0.4Co0.2Fe0.8O3-δ-Gd0.1Ce0.9O1.95 nanocomposite cathodes via a modified sol-gel process for intermediate temperature solid oxide fuel cells", 

ACS Applied Nano Materials, 1, 2934 (2018). (IF=TBA)

 

37. K. J. Samdani, D. W. Joh, K. T. Lee∗

"Molybdenum carbide nanoparticle-decorated 3D nitrogen-doped carbon flowers as an efficient electrode for high-performance, all-solid-state symmetric supercapacitors",

Journal of Alloys and Compounds, 748, 134 (2018). (IF=3.779)

 

36. J. W. Park and K. T. Lee*,

"Enhancing performance of La0.8Sr0.2MnO3-𝛿-infiltrated Er0.4Bi1.6O3 cathodes via controlling wettability and catalyst loading of the precursor solution for IT-SOFCs",

Journal of Industrial and Engineering Chemistry, 60, 505 (2018). (IF=4.841)

IF published in Jun. 2018
 
2017

35. B. -H. Yun,  C. -W. Lee, I. Jeong and K. T. Lee*,

"Dramatic Enhancement of Long-Term Stability of Erbia-Stabilized Bismuth Oxides via Quadrivalent Hf Doping",

Chemistry of Materials, 29(24), 10289 (2017) (IF=9.466)

34. K. J. Samdani, D. W. Joh, M. K. Rath and K. T. Lee*,

"Electrochemical mediatorless detection of norepinephrine based on MoO3 nanowires", 

Electrochimica Acta, 252, 268 (2017). (IF=4.798)

33. M. K. Rath, Y. M. Jung, J. H. Park, D. W. Joh, and K. T. Lee*,

"Heterogeneous nanograin structured NiO-YSZ anodes via a water-in-oil microemulsion route for solid oxide fuel cells",

Journal of Alloys and Compounds, 723, 681 (2017). (IF=3.133)

32. D. W. Joh, J. H. Park, D. Kim, E. D. Wachsman, and K. T. Lee*, 

“Functionally Graded Bismuth Oxide/Zirconia Bilayer Electrolytes for High-Performance Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs)”, 

ACS Applied Materials & Interfaces, 9, 8443 (2017). (IF=7.504) 

31. S. Y. Jeon, B. Singh, H. N. Im, K. T. Lee, and  S. J. Song*,

"Pd-YSZ Cermet Membranes with Self-reparing Capability in Extreme H2S Conditions", 

Ceramics International, 43, 2291 (2017). (IF=2.968)

30. J. W. Park, D. W. Joh, B. H. Yun, D. Kim, J. Samdani, and K. T. Lee*,

“Development of Nanostructured La0.8Sr0.2MnO3-δ-Er0.4Bi1.6O3 Cathodes via an Infiltration Process with Different Polymeric Agents for Intermediate Temperature Solid Oxide Fuel Cells”, 

International Journal of Hydrogen Energy, 42, 6332 (2017).   (IF=3.582) 

IF published in Jun. 2017
 
2016

29. H. N. Im, B. Singh, J. W. Hong, I. H. Kim, K. T. Lee, and S. J. Song*,

"Defect Chemistry of Highly Defective 

La0.6Sr0.4Co0.2Fe0.8O3-δ by Considering Oxygen Interstitials", 

Journal of The Electrochemical Society, 163 (14), F1588 (2016).  (IF=3.014)      

 

28. D. W. Joh, R. K. Manasa, J. W. Park, J. H. Park, K. H. Cho, S. Lee, K. Y. Yoon, J. H. Lee, and K. T. Lee*,

“Sintering Behavior and Electrochemical Performances of Nano-sized Gadolinium-doped Ceria via Ammonium Carbonate assisted Co-precipitation for Solid Oxide Fuel Cells”, 

Journal of Alloys and Compounds, 682, 188 (2016). (IF=3.014) 
 

27. D. W. Joh, J. H. Park, D. Kim, B. H. Yun, and K. T. Lee* 

“High Performance zirconia-bismuth oxide nanocomposite electrolytes for lower temperature solid oxide fuel cells”, 

Journal of Power Sources, 320, 267 (2016).   (IF=6.333)    

 

26. D. W. Jung#, K. T. Lee#, and E. D. Wachsman*,

"Dysprosium and Gadolinium Double Doped Bismuth Oxide Electrolytes for Low Temperature Solid Oxide Fuel Cells”, 

Journal of The Electrochemical Society, 163(5), F411-F415(2016).   (IF=3.014)   

 

25. K. T. Lee*, S.I. Cha, K.T. Kim, K. H. Lee, and H. Hong*,

"Sintering Behavior, Microstructural Evolution and Mechanical Properties of Ultra-fine Grained Alumina Synthesized via In-situ Spark Plasma Sintering", 

Ceramics International, 42, 4290 (2016).   (IF=2.758)   

IF published in Jun. 2016
 
2015

24. Y. L. Huang, C. Pellegrinelli, K. T. Lee, A. Perel, and E. D. Wachsman*,

"Enhancement of La0.6Sr0.4Co0.2Fe0.8O3-δ Surface Exchange through Ion Implantation", 

Journal of The Electrochemical Society, 162, F965, (2015)

 
2014

23. K. T. Lee, A. A. Lidie, H. S. Yoon, and E. D. Wachsman*, 

“Rational Design of Lower Temperure Solid Oxide Fuel Cell Cathodes via Nano-tailoring of Co-assembled Composite Structures”, 

Angewandte Chemie International Edition, 53, 13463 (2014).

*News report in 연합뉴스, 서울경제, 전자신문(etnews), 헤럴드 경제, 아시아뉴스 통신, etc. 

 

22. K. T. Lee*, and E. D. Wachsman, 

“Role of Nanostructures on SOFC Performance at Reduced Temperatures”, 

MRS Bulletin, 39, 783 (2014) 

*Invited Paper  

  

21. D. W. Jung, K. T. Lee*, and E. D. Wachsman*,

"Terbium and Tungsten Co-doped Bismuth Oxide Electrolytes for Low Temperature Solid Oxide Fuel Cells”, 

Journal of The Korean Ceramic Society, 51, 260 (2014)

  

20. H. Zhu#, K. T. Lee#, G. T. Hitz, Z. Han, C. S. Lee, K. Xu, E. D. Wachsman*, and L. Hu, 

“Freestanding Na2/3Fe1/2Mn1/2O2@Graphene Film for Sodium-ion Battery Cathode”, 

ACS Applied Materials & Interfaces, 4, 4242 (2014)

 
2009-2013

19. K. T. Lee, B. W. Lee, M. A. Camaratta, and E. D. Wachsman*, 

“Enhanced Oxygen Reduction Reaction with Nano-scale Pyrochlore Bismuth Ruthenate via Cost-effective Wet-chemical Synthesis”, 

RSC Advances, 3, 19866 (2013)

  

18. K. T. Lee, N. J. Vito, and E. D. Wachsman*, 

“Comprehensive Quantification of Ni-Gd0.1Ce0.9O1.95 Anode Functional Layer Microstructures by Three-Dimensional Reconstruction using a FIB/SEM dual beam system”, 

Journal of Power Sources, 228, 220 (2013)

  

17. K. T. Lee, A. A. Lidie, S. Y. Jeon, G. T. Hitz, S. J. Song, and E. D. Wachsman*, 

“Highly Functional Nano-Scale Stabilized Bismuth Oxide via Reverse Strike Co-Precipitation for Solid Oxide Fuel Cells”, 

Journal of Materials Chemistry A, 1, 6199 (2013)

  

16. K. T. Lee, D. W. Jung, H. S. Yoon, A. A. Lidie, M. A. Camaratta, and E. D. Wachsman*, 

“Interfacial Modification of La0.80Sr0.20MnO3-δ –Er0.4Bi1.6O3 Cathodes for High Performance Lower Temperature Solid Oxide Fuel Cells”, 

Journal of Power Sources, 220, 324 (2012)

 

15. M.-B. Choi, K.-T. Lee, H.-S. Yoon, S.-Y. Jeon, E. D. Wachsman, and Sun-Ju Song*, 

“Electrochemical Properties of Ceria-Based IT-SOFC Using Microwave Heat-treated La0.1Sr0.9Co0.8Fe0.2O3-δ as a Cathode”, 

Journal of Power Sources, 220, 377 (2012)

  

14. K. T. Lee, C. M. Gore, and E. D. Wachsman*, 

“Feasibility of Low Temperature Solid Oxide Fuel Cells Operating on Reformed Hydrocarbon Fuels”, 

Journal of Materials Chemistry, 22, 22405 (2012)

  

13. K. T. Lee, H. S. Yoon, and E. D. Wachsman*, 

“The Evolution of Low Temperature Solid Oxide Fuel Cells”, 

Journal of Materials Research, 27, 2063 (2012)

*Invited Featured Paper (Cover Featured Article) 

  

12. K. T. Lee, H. S. Yoon, J. S. Ahn, and E. D. Wachsman*, 

“Bimodally-Integrated Anode Functional Layer for Low Temperature Solid Oxide Fuel Cells”, 

Journal of Materials Chemistry, 22, 17113 (2012)

  

11. K. T. Lee, N. J. Vito, H. S. Yoon, and E. D. Wachsman*, 

“Effect of Ni-Gd0.1Ce0.9O1.95 Anode Functional Layer Composition on Performance of Lower Temperature SOFCs”, 

Journal of The Electrochemical Society,  159, F187 (2012)

  

10. K. T. Lee, D. W. Jung, M. A. Camaratta, H. S. Yoon, J. S. Ahn, and E. D.Wachsman*, 

“Gd0.1Ce0.9O1.95/Er0.4Bi1.6O3 Bilayered Electrolytes Fabricated by a Simple Colloidal Route using Nano-sized Er0.4Bi1.6O3 Powders for High Performance Low Temperature Solid Oxide Fuel Cells”, 

Journal of Power Sources, 205, 122 (2012)

  

9. E. D. Wachsman*, C. A. Malowe, and K. T. Lee

“Role of Solid Oxide Fuel Cells in a Balanced Energy Strategy”, 

Energy and Environmental Science, 5, 5498 (2012)

*News report in Ceramic Tech Today, American Ceramic Society Bulletin, etc. 

  

8. E. D. Wachsman*, and K. T. Lee

“Lowering the Temperature of Solid Oxide Fuel Cells”, SCIENCE, 334, 935 (2011). (Cited > 1200 times) 

*News report in Scientific American, Ceramic Tech Today, MSNBC, Technology Review, American Ceramic Society Bulletin, PRNEWS WIRE, physorg, etnews(Korea), etc. 

 

7. D.-K. Lim, M.-B. Choi, K.-T. Lee, H.-S. Yoon, E. D. Wachsman, and S.-J. Song*, 

“Non-Monotonic Conductivity Relaxation of Proton-Conducting BaCe0.85Y0.15O3-δ upon Hydration and Dehydration,” 

International Journal of Hydrogen Energy, 36, 9367 (2011)

 

6. D.-K. Lim, M.-B. Choi, K.-T. Lee, H.-S. Yoon, E. D. Wachsman, and S.-J. Song*, 

“Conductivity Relaxation of Proton-Conducting BaCe0.85Y0.15O3-δ upon Oxidation and Reduction,” 

Journal of the Electrochemical Society, 158, B852 (2011)

 

5. K. L. Duncan, K. T. Lee, and E. D. Wachsman*, 

“Dependence of Open-circuit Potential and Power Density on Electrolyte Thickness in Solid Oxide Fuel Cells with Mixed Conducting Electrolytes”, 

Journal of Power Sources, 196, 2445 (2011).  

 

4. D.W. Jung, K. Duncan, M. A. Camarratta, K. T. Lee, J. Nino and E. Wachsman* 

“Effect of Annealing Temperature and Dopant Concentration on Conductivity Behavior in (DyO1.5)x-(WO3)y-(BiO1.5)”, 

Journal of The American Ceramic Society, 93, 1384 (2010)

  

3. J.S. Ahn, M. Camaratta, D. Pergolesi, K.T. Lee, H. Yoon, B.W Lee, D.W. Jung, E. Traversa and E. D. Wachsman*, 

“Development of High Performance Ceria/Bismuth Oxide Bilayered Electrolyte IT-SOFCs”, 

Journal of The Electrochemical Society, 157, B376 (2010)

 

2. J.S. Ahn, H. Yoon, K. T. Lee, and E.D. Wachsman*, 

“Performance of IT-SOFC with Ce0.9Gd0.1O1.95 Functional Layer at the Interface of Ce0.9Gd0.1O1.95 Electrolyte and Ni-Ce0.9Gd0.1O1.95 Anode”, 

Fuel Cells, 9, 643 (2009)

 

1. J. S. Ahn, D. Pergolesi, M. Camaratta, H. Yoon, B. W. Lee K. T. Lee*, D.W. Jung. E. Traversa and E. D. Wachsman*, 

High Performance Bilayered Electrolyte Intermediate Temperature Solid Oxide Fuel Cells”, 

Electrochemistry Communications, 11, 1504 (2009).  

 
DISSERTATIONS

2. K. T. Lee*

“Comprehensive Development of High Performance Solid Oxide Fuel Cells For Intermediate and low Temperature Applications”, Ph.D Dissertation, University of Florida, (2010). 

 

1. K. T. Lee*, “Microstructure and Mechanical Properties of In-situ Fabricated Alumina by Spark Plasma Sintering Process”,

MS Thesis, Korea Advanced Institute of Science and Technology, (2005). 

 

Room E6-321A/303, Dept. of Energy Science & Engineering, DGIST

333 Techno Jungang-daero, Hyeonpung-myeon, Dalseong-gun, Daegu, 42988, Republic of Korea

This site was designed with the
.com
website builder. Create your website today.
Start Now